Tyrolit
Tyrolit Core Drill Rigs | Precision Drill Stands & Column Rigs for Concrete Coring
Tyrolit Core Drill Rigs are the precision guidance and feed systems that transform a Tyrolit drill motor into a complete, high-accuracy, stationary core drilling station. A drill rig is essential for any hole that requires precise angle and alignment, exceeds hand-held drilling capacity in depth or diameter, or where operator safety requires the drill to be fixed to the work surface. Tyrolit’s DRA-series rigs are engineered with heavy-duty steel columns, precision-ground gear racks, and smooth-action carriages that provide vibration-free, linear feed of the drill motor into the concrete. The rigs are available in multiple column lengths to accommodate different drilling depths (up to 1,000 mm+) and are equipped with versatile base options: universal anchor-bolt bases, quick-lock vacuum bases for smooth floors, and combination bases for walls and ceilings. Key design features include an integrated levelling system for rapid setup, a telescopic column extension for deep drilling, and a precision hand-wheel and clutch feed mechanism that gives the operator tactile feedback on cutting pressure. For contractors, a Tyrolit rig means a drill hole that is perfectly perpendicular to the surface (or at a chosen angle), with no bit binding, minimal diamond segment wear, and significantly reduced risk of a stuck bit—a costly and time-consuming job-site delay. Tyrolit rigs are the solid foundation for professional core drilling.
Send an Enquiry
We'll get back to you on WhatsApp.
Trusted by Industry Leaders
Precision-Ground Rigid Columns
Tyrolit’s heavy-gauge steel columns with machined rack teeth ensure the drill carriage moves without play or vibration, producing straight, accurate holes and maximising bit life by preventing side-loading.
Quick-Set Levelling and Anchoring
Integrated levelling screws and fine-adjustment tilting mechanisms allow the operator to square the rig to the work surface in seconds, critical for drilling accurate angled penetrations and floor drains.
Universal Motor Mount Compatibility
The standard Tyrolit collar clamp accepts all Tyrolit drill motors, and adapters are available for other brands, allowing workshops to standardize on Tyrolit rigs while using existing motor inventories.
Telescopic Columns for Deep Drilling
Segmented and telescopic columns enable a single rig to drill short anchor holes and deep pass-through cores by extending the column length, eliminating the need for multiple rigs.
Secure Vacuum and Anchor Base Options
The Tyrolit vacuum base system provides a rock-solid hold on smooth concrete floors without through-drilling anchor holes, preserving water-proof membranes, while the anchor base offers the ultimate safety for wall and ceiling drilling.
Smooth Mechanical Feed System
The geared carriage with a clutch-protected hand-wheel gives the operator complete control over penetration rate, preventing the bit from “grabbing” and stalling on rebar, which is the primary cause of diamond segment damage.
Why a Tyrolit Rig Is Essential for Professional Core Drilling Profitability
A professional core drilling contractor charges by the hole. The difference between profit and loss on a hole often comes down to setup time and consumable wear. Tyrolit rigs are designed for one-person setup; the lightweight yet rigid construction allows a single operator to position, level, and secure the rig in under ten minutes. The precise linear feed means the bit cuts freely without the lateral scrubbing that can wear a diamond segment prematurely by up to 50%. Furthermore, the secure anchorage and safety clutch prevent the rig from twisting free if the bit jams—a common hazard that can lead to serious injury and machine damage. For contractors bidding on large multi-hundred-hole projects, the speed and safety advantages of a dedicated Tyrolit rig translate directly to higher daily output and a better safety record.
Selecting the Right Tyrolit Rig for Your Core Drilling Applications
The DRA150 is the versatile workhorse for holes up to 150 mm diameter and standard depth. The DRA300 and DRA500 offer heavier columns for larger diameter and deeper holes. Rigs can be configured as stand-alone floor drills, wall-mounted, or ceiling-mounted with the appropriate base plate and pillar assembly. Tyrolit provides a compatibility chart matching every power unit to the correct rig and indicates the maximum safe drilling diameter for each combination. The rigs are built to last a career, and Tyrolit’s parts service ensures that wear items like carriage bearings and rack seals can be refreshed, keeping the rig operating like new.